Screws on TOY Group trolley

Made with all the know-how of the TOY group, with a total length of 12m ‘9m plus a 3m folding element). They are easily moveable with a perfect balance point. In hot galvanized tubes of 3mm thickness ensuring robustness and durability. Intermediate bearings with bronze graphity rings require no maintenance or greasing. The winch is multiplied allows for effortless height adjustment. The 2mx1m galvanized hopper is equipped with a grid that prevents the passage of foreign objects and a flow control hatch. The chassis is equipped with 145/13 pneumatic wheels (speed 25km/h) giving it stability on the road. The 7.5kw engine gives it an optimum power and flow of about 55m3 (likely to vary depending on the PS and the humidity of the cereal). The quickly removable arrow prevents manoeuvres around the hopper. TOY Group screws on trolley are provided with a waterproof box equipped with a rotational inverter (for quick and effortless unwinding and also allows the screw to be emptied in full in case of a change of grain). Our screws also come with several options and can be fitted with a rear light ramp; an orientable output and even a chassis reinforcement for intensive use (e.g. CUMA).

• Length 12 meters / folding
• Available in diameter 200, motorization 7.5kW
• Flow of about 55m3/hour

Options:

• Rear-fire ramp
• Reclining output
• Reinforced chassis for intensive use (CUMA…)

Lift/horizontal screws:

TOY Group’s uplifting and horizontal screws are robust in hot galvanized steel 1.5 to 3mm thick and 3/1.5 to 6/3mm thick. They come in several versions: from the smallest in diameter 100 to the diameter 240mm. Note that the 160, 200 and 240mm screws are systematically equipped with self-clear intermediate bearings (all 1, 2, 2.50M), without maintenance. This gives to our screws a long life and avoids friction on the tubes when the screw turns empty (premature fatigue). This also allows us to obtain very long lengths for horizontal screws (e.g. diam. 160 L up to 30M maximum). Our screws come in several versions, from the transport of the cereal to much more varied products (minerals, plastics, etc.). With decades of experience, the TOY Group knows how to adapt its screws to your products. We offer special screws peas or fababeans with reinforced nets and motor-reducer, but also with not-ended mesh departures for heavy or delicate products.

Several transmissions are available: conveyor belt transmission, direct fitt onto motor shalf or geared motor Different engines are available, adapted to: length, diameter, inclination, even the type of product. Many options are available depending on the diameter: foot protection grids, sloping exits, adjustment valves, hoppers, specific boxes, adaptations under various silos, intermediate outputs for horizontal screws only (manual or pneumatic).

• Among the strongest on the market
• 100 to 240mm diameter
• From 2.50 to 30 metres
• Training: pulleys/belts, geared motor, motor fitted
• Many engines available

Options:

• 250 liters hopper recovery
• Cover silo canvas
• Cell recovery
• Intermediate output (manual or pneumatic)
• Not fine fillets (anti-agglomeration and jamming, limits product intake)
• Thick fillets (better resistance to abrasive products)
• Takeover under silo
• Adaptation boitard
• Pit recovery (foot protection grid, adjustment valve)
• Intermediate entry (entry hopper)
• Geared motor (for heavy or delicate products)

Carpet mounts bags:

Manufacturing 100% TOY, a simple and practical tool for handling bags or other: truck loading, exit under machines of fragile products (e.g. cereal flake under rolling mill), … TOY Group makes your custom carpet according to your needs, products to carry, flow, tilt, etc.

Carpet mounts TOY Group bags, equipped with a trolley with pneumatic wheels, a crank winch with automatic brake (great maneuverability), cast iron bearings, ball bearings on the rollers band supports. Balanced rotation of great longevity. Our carpets have a smooth or striped rubber conveyor belt (its applications), 500mm wide highly resistant to abrasion. Powered by a high-reliability and high torque geared motor. Optional: adjusting carpet speed (by dimmer). In order to ensure high quality manufacturing, our carpets are painted in epoxy and are tested in the factory.

• With or without rafters depending on your use
• From 4 to 6 meters
• Power 0.75 kW
• Cart with pneumatic wheels diameter 400mm
• Height adjustment by manual winch with automatic brake
• Painted steel square tube structure
• Cast iron
• Tape support rollers diameter 60mm with ball bearings
• Carpet speed 20 metres per minute (adjustable speed option)
• Maximum load 300 kg/meter

Pallet elevators:

TOY Group pallet lifts: made of epoxy painted steel or hot galvanized (optional). Intended for the transfer of cereals or the transport of flour. The big advantage of our product is that it can work both vertically and 45 degrees tilt. The pallets are attached to a chain that provides all-wheel drive. The engine is provided by a conveyor belt pulley transmission and engine power ranges from 1.5kW to 4 kW. The elevator is offered with various types of legs: left or right (at 90 degrees compared to the output of the product) and different lengths: 350mm,1500mm,3000mm. They also come with a conical screw that can be fitted with a tuning valve. Very simple to assemble because of its single-driver partitioned inside, it is small and adapts in small places (low height of the foot and head). With a minimum of 3 m height and a maximum of 12 m height of robust construction and a maximum flow of 200qx/hour in cereals, René TOY paddle lift is an excellent equipment with a very affordable price.

• Height from 3 to 12 meters
• From 1.5 kW to 4 kW
• Power, product and foot length: 200 Qx/hour
• Taken back into the pit by conical screw
• 6 types of feet available: short/medium/long/right or left

Options:

• Trough screws
• Conical screws
• Adjustment valve
• Various René TOY handling accessories

Bucket elevators:

René TOY bucket lifts: 20/10th or 30/10th galvanized steel depending on the model. Dedicated to the handling of cereals and flour products. Their galvanized steel design allows for outdoor (or indoor) use and ensures a long life. Equipped, as an option, with a safety cage ladder, a rest platform and an intermediate platform (from 12m) and a very large surface head platform (4M2) allowing ease and safety of work during various interventions (maintenance, etc.). The buckets attached to a very high quality strap are numbered from 8.5 to 11 per linear meter allowing flows of 40, 70 or 135m3/h. The pulley/belt transmission engine is powered by engines from 1.5kw to 15kW depending on speeds and heights. To meet all the requirements of our customers, many accessories add to the range of our elevators (e.g. multi-direction box, 2nd entry pocket, etc.).

• Height 6 to 32 meters
• From 1.5 kW to 15 kW
• Flows rates 40, 70, 135m3
• 2 types of entries
• Head bridges and mid-to-cool platforms

Options:

• An additional entry bracket
• Buckets available in two sizes:
  flow rates 40 and 70 m3/hour (dim: width 135mm x depth 125mm x height 85mm; volume 0.7 litres)
  flow rates 135 m3/hour flow (Dim: width 225 x depth 150 mm x height 110 mm; volume 2.06 liters)
• Various René TOY handling accessories

Chain carriers:

• From 7 to 53 metres
• Power from 2.2 kW to 11 kW
• Flows up to 120m3

TOY Group chain carriers are made exclusively of galvanized steel. They are intended for horizontal handling (maximum 15 degrees tilt) of cereals, pellets and flour in large flows. Their main advantage is to be able to transport products over very long lengths (from 7 to 53m) with relatively moderate electrical power from 2.2 kW to 11 kW. The transmission is carried out by a hollow shaft motor (direct transmission). Several models are available for speeds ranging from 40 to 120 m3 maximum.

Option:

• Different intermediate outputs (manual or electric)
• Various TOY handling accessories

Pre-cleaners:

The Toy pre-cleaner comes from a new technology, it cleans 2 to 3 times better than the models on the market. It effectively removes dust, bales, straws and other impurities lighter than grain. It is easily incorporated into existing handling because of its modular height (adjustable sliding feet). It also has a deported setting. It has a fine cleaning setting depending on the types of cereals or protein. It comes in two versions:

• Model NS30 capacity 30T/h airflow 4500m3/h power 2.2kw
• Model NS50 capacity 50T/h airflow 9500m3/h power 5.5kw

• For the disposal of light waste: dust, balls, small-straws, …
• Air flow between 4500 and 9500 m3/h
• Simple, flexible and convenient installation
• Aligned entrances and exits (avoid a recovery screw depending on your configuration

Options:

• Decompression Cyclone
• Link pipe (pre-cleaner/cyclone) – 200 or 300 mm, separating air from impurities

Handling options/accessories:

View/download the accessories table in PDF