Inner round cells

100 %TOY, made of galvanized sheet metal 75/100 thick, many diameters are available to meet all your requirements. With a minimum diameter of 2.22m and 8m maximum, they are also flexible in height from 0.90m to 6. 78m. Our cells have a large number of accessories ranging from a visit hatch through recovery pipes of various diameters 200 ,300 and 400 to allow the passage without difficulty of your various screws of repeats. Also note that our recovery pipes are offered in two different inclinations: wide angle and small angle in order to adapt as best as possible to the different ventilation systems or to allow an exit of the screw of higher recovery.

• Inner cells: from 2.22 to 8 meters
• Height: 0.90 to 6.75 metres
• In galvanized sheet metal. 75/100
• Ventilation solutions: different types of masonry
• Many accessories
• Easy assembly: lifting system rental

Options:

• Visiting hatch
• Taken back by screw and/or scrapy screw
• Filter cover
• Ventilation (see ventilation section)
• Scraper screw

OUTDOOR ROUND CELLS

We also have a full range of outdoor cells that can be offered in several models. Corrugated iron from 4.50 m in diameter to 15.28 m for a maximum height of 21.49m (for larger diameters) or smooth sheet metal from 4.50m to 12m90 for a maximum height of 23.60 (for the largest diameters).

They also exist in a foot version with a cone at 40 or 60 degrees, with a mini diameter of 2.80m up to 7.40m with a maximum height of 23.90m (for larger diameters). The flat sheet metal structure represents a big advantage in terms of product retention (dust, bales, etc.). These smooth walls allow for perfect emptying even with delicate products. Options: all accessories to meet your requirements (visiting door, recovery hose, ventilation, fan, scrapy screw, etc.).

• From diameter 4.50 to 15.28 meters (depending on the models)
• Height of 21.49 meters to 23.60 meters (depending on models)
• Galvanized sheet metal
• Ventilation solutions: different types of masonry
• Many accessories
• Assembly without hoisting (for corrugated sheets): equipment lifting rental
• Mounting with hoisting (for smooth sheets)

Options:

• Visiting hatch
• Taken back by screw and/or scrapy screw
• Ventilation
• Porte OS – D

LOADING BUSHELS

The loading bushel, ideal tool for the quick loading of trucks in. Available in 3 models: 30m3, 44m3, 58m3 to meet your needs (58m3 for 30T rapeseed or sunflower). Fully galvanized for great longevity. Can be sold without a roof for an indoor building installation. Easy assembly, thanks to its sliding box system on the feet avoiding the intervention of a crane. The hatch can be opened from the ground or bridge (optional) at loading height.

Also optional, you can integrate a weighing system (installed under 4 feet of the bushel) to obtain a very high precision of weighing (stainless steel weighing sensor with anti-tipping safety). The weight indicator (black background with red writing) can be equipped (optional) with a weight repeater (larger and deported screen). It is also possible to program thresholds (e.g. quantity requested 20 tons so the display will stop handling at 20T in the bushel).

• Square bushels
• Galvanized sheet ep. 20/10
• Volume: 30, 44, 58m3
• Loading height – 4.80 metres
• Safety bridges and ladders
• Mounting without crane: strong-fire rental
• Slopes at 45 degrees (cereals) or slopes at 60 degrees (flour)

Options:

• With load cells
• Weighing system with electronic display and 4 gauges
• Access bridges, safety cage ladders
• Visiting hatch on the roof
• Ground hatch opening control
• High-level probe

Reception pits

TOY Group reception pits different models:

• Square pits 4 slopes caught in masonry: the most economical solution. 4mx4m (bolted panels), galvanized steel. 20/10th with a square seat of 400 (for the screw) and its slopes at 45 or 60 degrees. Allows a perfect descent of the cereal. Cone volume is 11m3 with the possibility of installation of enhancement (to reach an additional capacity of 14m3 or 25m3. We offer an optional pit grid.
• Square pits 4 slopes laid on feet in a concrete formwork: they have the same characteristics as those described above, but offer you more advantages. In fact, it is enough to make a concrete formwork and come and deposit it inside. No more waterproofing problems because it is completely insulated from the ground thanks to its feet (suitable very well on wet soils). Other great features: This type of pit allows a complete emptying of the screw (no more worries when changing cereals). In addition, you have the option to uncouple the screw from the pit even when it is full (you access under the pit through a closing hatch, ideal in case of problems on the screw). An optional pit grid can be added.
• Rectangular pits 2 slopes on feet in a concrete formwork: they have a redler at the bottom of the pit. Several models are available: 2x6m, 2x8m, 2x10m or 3x6m, 3x8m, 3x10m. They are equipped with a pit grate (non-rolling). Two transfer rates are available: 30T/hour or 50T/hour.

• In galvanized sheet metal. 20/10
• Available in 2 slopes at 60 degrees and 4 slopes at 45 degrees or 60 degrees
• Different masonry
• Screw recovery, pallet lifts or chain carriers

Options:

• Depending on the pit type

Flour bushels

In high-quality galvanized sheet metal, TOY Group flour bushels are available in square versions of 1.25 and 1.80M, for volumes of 1200 to 12,000 litres. The standard versions are equipped with filling controls, a square exit hatch of 400 mm to 90cm from the ground.

Conical bushels are available in 1.80 and up to 3.80M for volumes between 4.54m3 and 58.40m3, painted steel. They are equipped as standard with looks for level control and an exit hatch (900 to 380 mm) to 90 cm from the ground. They are suitable for many of our accessories: screw recovery, soft screw departure, suction.

• Indoor installation
• Squares of 1.25 or 1.80 meters
• Rounds – 0.8 to 2.50 metres
• Height from 2.60 to 8.23 meters
• Volumes: 450 to 28,000 litres
• Up to 4 boosters

Options:

Square version:

• Adjustable output height (foot height)
• Enhanced (4 maximum enhancers)
• Cover
• 1.25m square version: forklift handling

Conical version:

• Pneumatic filling

Cereal hoppers

René TOY grain hoppers are available in squares of 0.80, 1.25 and 1.80 meters for volumes from 250 to 12,000 liters. They are equipped as standard with a square output of 160mm to 50 cm from the ground and are suitable for a large number of accessories: screw-by-screw, soft screw start, suction.

• Squares from 0.80 to 1.80 meters
• Up to 4 boosters
• Heights from 1.30 to 6 meters
• Volumes: 250 to 12,000 litres

Options:

• Adjustable output height (foot height)
• Enhanced (4 maximum enhancers)
• Cover
• 1.25m square version: forklift handling
• Closing door

Big bags supports

Our sturdy metal frames are painted. They come in a forklift-handling version (sold on a unit basis) or a chain-bar version (sold in single, double or triple). They are adaptable for big-bags of 1, 1.5 or 2 m3.

• Painted steel structure
• Capacity 1.5 tons
• Optional hoppers
• On trolley or chain hoist

As an option, you can add a hopper.

Rotomoulated hoppers

TOY Group’s 250-litre rotomouled hoppers are the most versatile on the market. Made of polyethylene with a slope of 70 degrees facilitating the product flow. They can be equipped with electric or pneumatic devours. TOY Group also offers supplementing hoppers consisting of a 50-liters polyethylene vat on a painted steel frame. Always with a slope of 70 degrees, they are equipped with electric devours and stainless steel dosing micro-screws. They are equipped with a lid. You can perform a microdosing (with or without weighing) but also supplementation (amino acids, minerals, additives …).

• Aspiration recovery
• Recovery by screw or soft screw
• Under silos, big bags or empty bags
• With or without a lid
• Capacity: 250 litres
• Benefits of polyethylene: no oxidation and factor. exceptional gliding

Soft silos

On a hot galvanized or painted metal frame, our flexible silos range from 2 to 30 m3 of storage capacity, ranging in size from 1.10 to 2.80 meters squared, and from 3.50 to 6.45 meters in height. Filtering layer on cover and 60-degree background can be either:

• Standard roofs, heavy series (carbonate) or PVC canvas (waterproof)
• Galvanized metal frame
• Pneumatic or screw filling

• Standard canvas (for light products less than 0.7 of specific weight)
• Heavy series canvas (for products of a density – 1.2 PS)
• PVC-coated composite canvas (for hydrophilic products of less than 0.9 PS density).

Options:

• Pick-up by rigid or flexible screw, suction
• Anti-bridging
• Pneumatic filling
• Decompression