+33 (0)2 54 85 01 10 info@toy-sa.com

TOY Group Industry Handling Range

All TOY Group equipment for industrial handling

Handling equipment: TOY Group range

Our handling and cleaning range: innovative, reliable, solid, economical products, designed and manufactured in France to meet your needs and to bring you the best of the best of the right value for your money. René TOY also carries out your complete “Transport/Handling” studies. From the design by our design office to the assistance of assembly. Download the brochure: TOY Solutions Industries Group

Screws
Lifting

Lift screws

Hot galva steel
diameter 100, 169, 200, 240mm

Horizontal screws

Horizontal screws

Carpet mounts bags
many models

Carpet
Conveyor

Conveyor carpet

Carpet mounts bags
smooth or chevron

Elevators
Pallets

Pallet elevators

Pallet elevators. H 3 to 12M
200qx/Hour debit

Bucket elevators

Bucket elevators

Bucket elevators
Flow rates up to 135M3/Hour*

Carriers
chain

Chain carriers

Chain carriers. 7 to 53M
Flow up to 120M3

*Approximately depending on configuration. Non-contract photos and info, subject to change without notice – see us

Lift and horizontal screws

TOY Group screw

TOY Group rugged uplifting and horizontal screws in hot galvanized steel (ply from 1.5 to 3mm and spires from 3/1.5 to 6/3mm). available in diameter 100, to 240mm). Equipped with self-lubricating intermediate bearings (all 1, 2, 2.50M), maintenance-free (160, 200 and 240mm screws) allowing very long lengths for horizontal screws (e.g. diam. 160 L up to 30M maximum). Transport of cereals version or for various products (minerals, plastics, etc.). Special screw versions peas or fababeans with reinforced nets and geared motor or departures fine thread for heavy or delicate products.

Hot galvanized steel. Self-lubricating intermediate bearings (all 1, 2, 2.50M), maintenance-free (160, 200 and 240mm screws) long lengths for horizontal screws (e.g. 160mm up to 30m). Cereal or other product versions

Lift/horizontal screws:

TOY Group’s uplifting and horizontal screws are robust in hot galvanized steel 1.5 to 3mm thick and 3/1.5 to 6/3mm thick. They come in several versions: from the smallest in diameter 100 to the diameter 240mm. Note that the 160, 200 and 240mm screws are systematically equipped with self-clear intermediate bearings (all 1, 2, 2.50M), without maintenance. This gives to our screws a long life and avoids friction on the tubes when the screw turns empty (premature fatigue). This also allows us to obtain very long lengths for horizontal screws (e.g. diam. 160 L up to 30M maximum). Our screws come in several versions, from the transport of the cereal to much more varied products (minerals, plastics, etc.). With decades of experience, the TOY Group knows how to adapt its screws to your products. We offer special screws peas or fababeans with reinforced nets and motor-reducer, but also with not-ended mesh departures for heavy or delicate products.

Several transmissions are available: conveyor belt transmission, direct fitt onto motor shalf or geared motor Different engines are available, adapted to: length, diameter, inclination, even the type of product. Many options are available depending on the diameter: foot protection grids, sloping exits, adjustment valves, hoppers, specific boxes, adaptations under various silos, intermediate outputs for horizontal screws only (manual or pneumatic).

  • Among the strongest on the market
  • 100 to 240mm diameter
  • From 2.50 to 30 metres
  • Training: pulleys/belts, geared motor, motor fitted
  • Many engines available

 

Lift and horizontal screws
diameter screws in mm

100

125160200

240

Ø. Core screw

15×21

22×3025×3535×45

40×50

Ply. Net

3/1.5

3/1.54.4/2.16/3

6/3

Ply. Tube

1.5

1.522

3

 

Options:

  • 250 liters hopper recovery
  • Cover silo canvas
  • Cell recovery
  • Intermediate output (manual or pneumatic)
  • Not fine fillets (anti-agglomeration and jamming, limits product intake)
  • Thick fillets (better resistance to abrasive products)
  • Takeover under silo
  • Adaptation boitard
  • Pit recovery (foot protection grid, adjustment valve)
  • Intermediate entry (entry hopper)
  • Geared motor (for heavy or delicate products)

Carpet mounts bags

Smooth-banded carpet or rafters

Smooth-banded or chevrons. Length from 4 to 6M. 0.75kW power engine high-reliability and high torque-reducing geared motor. On pneumatic wheeled trolleys, crank winch with automatic brake (great handling), cast iron bearings, ball bearings on the rollers with band supports. 500mm width.

Smooth or chevron band. Length from 4 to 6M. Power 0.75kW. 500mm width. Bespoke

Carpet mounts bags:

Manufacturing 100% TOY, a simple and practical tool for handling bags or other: truck loading, exit under machines of fragile products (e.g. cereal flake under rolling mill), … TOY Group makes your custom carpet according to your needs, products to carry, flow, tilt, etc.

Carpet mounts TOY Group bags, equipped with a trolley with pneumatic wheels, a crank winch with automatic brake (great maneuverability), cast iron bearings, ball bearings on the rollers band supports. Balanced rotation of great longevity. Our carpets have a smooth or striped rubber conveyor belt (its applications), 500mm wide highly resistant to abrasion. Powered by a high-reliability and high torque geared motor. Optional: adjusting carpet speed (by dimmer). In order to ensure high quality manufacturing, our carpets are painted in epoxy and are tested in the factory.

 

  • With or without rafters depending on your use
  • From 4 to 6 meters
  • Power 0.75 kW
  • Cart with pneumatic wheels diameter 400mm
  • Height adjustment by manual winch with automatic brake
  • Painted steel square tube structure
  • Cast iron
  • Tape support rollers diameter 60mm with ball bearings
  • Carpet speed 20 metres per minute (adjustable speed option)
  • Maximum load 300 kg/meter

Pallet lifts

TOY Group Pallet Lifts

For grain transfer and flour transport. Epoxy paint finish steel or hot galvanized (optional). Height from 3 to 12M. Work vertically or at 45 degrees. Chain-fixed pallets / all-wheel drive. Motorization: from 1.5kW to 4 kW conveyor belt pulley. Several types of legs: left or right (at 90 degrees) / lengths: 350mm,1500mm,3000mm. Very simple assembly, space-saving, adapts to confined sites (low pitch of the foot and head). Robust construction. Maximum speed of 200qx/hour in cereals.

Height from 3 to 12M. Works vertically or at 45 degrees. Pallets on chain / all-wheel drive. Motorization: from 1.5kW to 4 kW conveyor belt pulley. Flow rates max 200qx/H in cereals.

Pallet elevators:

TOY Group pallet lifts: made of epoxy painted steel or hot galvanized (optional). Intended for the transfer of cereals or the transport of flour. The big advantage of our product is that it can work both vertically and 45 degrees tilt. The pallets are attached to a chain that provides all-wheel drive. The engine is provided by a conveyor belt pulley transmission and engine power ranges from 1.5kW to 4 kW. The elevator is offered with various types of legs: left or right (at 90 degrees compared to the output of the product) and different lengths: 350mm,1500mm,3000mm. They also come with a conical screw that can be fitted with a tuning valve. Very simple to assemble because of its single-driver partitioned inside, it is small and adapts in small places (low height of the foot and head). With a minimum of 3 m height and a maximum of 12 m height of robust construction and a maximum flow of 200qx/hour in cereals, René TOY paddle lift is an excellent equipment with a very affordable price.

  • Height from 3 to 12 meters
  • From 1.5 kW to 4 kW
  • Power, product and foot length: 200 Qx/hour
  • Taken back into the pit by conical screw
  • 6 types of feet available: short/medium/long/right or left

 

Options:

  • Trough screws
  • Conical screws
  • Adjustment valve
  • Various René TOY handling accessories

Bucket elevators

Bucket elevators

20 or 30/10th galvanized steel. For handling cereals and floury products. Equipped, as an option, with a safety cage ladder, a rest platform, an intermediate platform, a very large surface head platform (4M2) allowing ease and safety of work. Buckets attached to a very high quality strap (from 8.5 to 11 to M/L. Flow rates of 40, 70 or 135m3/h. The pulley/belt transmission engine is powered by engines from 1.5kw to 15kW depending on speeds and heights.

Galvanized steel 20 or 30/10th. For cereals and floury products. Buckets attached to a very high quality strap (from 8.5 to 11 to M/L. Flow rates of 40, 70 or 135m3/h. The motor transmission pulley/belt from 1.5kw to 15kW.

Bucket elevators:

René TOY bucket lifts: 20/10th or 30/10th galvanized steel depending on the model. Dedicated to the handling of cereals and flour products. Their galvanized steel design allows for outdoor (or indoor) use and ensures a long life. Equipped, as an option, with a safety cage ladder, a rest platform and an intermediate platform (from 12m) and a very large surface head platform (4M2) allowing ease and safety of work during various interventions (maintenance, etc.). The buckets attached to a very high quality strap are numbered from 8.5 to 11 per linear meter allowing flows of 40, 70 or 135m3/h. The pulley/belt transmission engine is powered by engines from 1.5kw to 15kW depending on speeds and heights. To meet all the requirements of our customers, many accessories add to the range of our elevators (e.g. multi-direction box, 2nd entry pocket, etc.).

  • Height 6 to 32 meters
  • From 1.5 kW to 15 kW
  • Flows rates 40, 70, 135m3
  • 2 types of entries
  • Head bridges and mid-to-cool platforms

 

Options:

  • An additional entry bracket
  • Buckets available in two sizes:
    flow rates 40 and 70 m3/hour (dim: width 135mm x depth 125mm x height 85mm; volume 0.7 litres)
    flow rates 135 m3/hour flow (Dim: width 225 x depth 150 mm x height 110 mm; volume 2.06 liters)
  • Various René TOY handling accessories

Chain carriers

Carriers

TOY Group chain transporters exclusively in galvanized steel. Cereals load horizontal handling, pellets and flour in large flows. Transport on very long lengths (from 7 to 53m). Electrical power from 2.2 kW to 11 kW.

Made exclusively of galvanized steel. Horizontal handling (maximum tilt) of cereals, pellets and flour in large flows over very long lengths (7 to 53m). Several models available for speeds of 40 to 120 m3 maximum.

Chain carriers:

  • From 7 to 53 metres
  • Power from 2.2 kW to 11 kW
  • Flows up to 120m3

TOY Group chain carriers are made exclusively of galvanized steel. They are intended for horizontal handling (maximum 15 degrees tilt) of cereals, pellets and flour in large flows. Their main advantage is to be able to transport products over very long lengths (from 7 to 53m) with relatively moderate electrical power from 2.2 kW to 11 kW. The transmission is carried out by a hollow shaft motor (direct transmission). Several models are available for speeds ranging from 40 to 120 m3 maximum.

Option:

  • Different intermediate outputs (manual or electric)
  • Various TOY handling accessories

Some TOY Group handling facilities

Contactez nous par formulaire

 

Industry Contacts

Industry salesman : Benjamin Ollivier

Tel: 06 80 33 12 38
b.ollivier@toy-sa.com

Industry Project Assistant: Muriel Faucheux

Tel: 02 54 85 29 63
m.faucheux@toy-sa.com

 

General reception desk

Tel: ’33 (0)2 54 85 01 10
Fax: ’33 (0)2 54 72 60 67
info@toy-sa.com

TOY Group Montoire sur le Loir
Route des Reclusages 41800 Montoire sur le Loir