+33 (0)2 54 85 01 10 info@toy-sa.com

High-pressure rolling mills

A range of electric rolling mills and power grabs for industry, livestock, agriculture

TOY Group High Pressure Rolling Mills

For industry and electric motor farming or for power-up agriculture, the TOY Group has implemented high-level technology for these high-pressure rolling mills. The precision of the manufacture of these industrial machines, as well as the innovations on the transcoblock technology cylinders, the high hydraulic pressure of 3 to 15 tons, the independent drive of each cylinder, the protection by nitrogen sphere, make our rolling mills high-end equipment,

Electric rolling mills

6 widths and diameter cylinders:
Speeds from 1200 to 10200 KG/H*

Taking strength

2 widths and more cylinders:
Speeds from 4000 to 15200 KG/H*

Special models

Special custom models:
Flow rates as per configuration

*Indicative flows, depending on the grain and humidity. For optimal quality: recommended humidity level from 14 to 16% .
Non-contract photos and info, subject to change without notice – see us

Electric rolling mills: from 900 to 10200 Kg/H

6 electric rolling mills models

With flows from 900 to 10200 KG/H for powers of 6 to 37 kW. TOY Group electric rolling mills are equipped with transcobloc cylinders of (diameter X L in mm) 500X250, 500X450, 500X650, 800X450 or 800X850. Hydraulic pressure between cylinders ranges from 3 to more than 15 tons and offers optimal and regular work quality and high flows.

6 models of Electric Rolling Mills with flow of 900 to 10200 KG/H. POWERS FROM 6 TO 37 KW. THESE ELECTRIC LAMINOIRS have TRANSCOBLOC TYPE CYLINDRES from 500mm to 800mm and lengths from 250mm to 850mm.

TOY GROUP ROLLING MILLS: THE TECHNIQUE

Training by two groups:

  • Independent geared motor cylinders drive.
  • Industrial-series gearboxes.
  • High torque geared motor, easy load restart.
  • Technology without belts or chains, easy maintenance.

    High hydraulic pressure 3 to 15 tons:
  • Tightening principle: 2 hydraulic jacks push the mobile cylinder on the fixed cylinder (from 3 to 15 tons of pressure).
  • Cylinders supplying : hand pump tightening (control gauge)
  • Precise adjustment of the cylinder spread.
  • Fixed pressure for a regular work quality.

    Safe rolling:
  • Hydraulic circuit with nitrogen sphere (cylinders kickback if abnormal pressure)
  • Racing cylinders setting with double-stop anti-crash cylinders.
  • Rolling mills equipped with sieve and magnet ramps.
  • Scrapers installed to ensure cylinders cleanliness.

TOY GROUP ROLLING MILLS: THE QUALITY

Innovative large-diameter cylinders:

  • Steel of heavy treated thickness. Intermediate flasks and reinforcement flasks guaranteeing solidity. A whole high precision balancing.
  • diameter 500 to 800 mm provide the ideal angle of introduction(Nippel angle) for the passage of large seeds (peas or corn).

Transcobloc type technology:

  • Preservation of tree strength and bending characteristics by seamless assembly (Transcobloc-type technology).

Accurate and constant flow:

  • Inverted screw feeder for regular and constant feeding of cylinders. Geared motor with a dimmer for precise adjustment of production flow.

Options

  • Motorized hatch
  • Cylinders treated with carbonitriding gas (longer life).

TOY ROLLING MILLS: 6 MODELS FEATURES

Electric rolling mills: models and features

Models

500X200

500X400

500X600

800X400

800X800

800X1000

Cy cylinders: X L

500X250

500X450

500X650

800X450

500X850

800X1050

Average flows (Kg/h)

900 to 1200

3900 to 4600

5900 to 6600

4000 to 4700

7200 to 8600

9000 to 10200

Electrical power (kW)

6

15

22

15

30

37

Pressure between cylinders (Kg)

3000

4100

6100

8200

13300

15200

Indicative flows, depending on grains and moisture tx. For optimal quality: humidity tx recommended from 14 to 16% .

Laminys taken by force: From 900 to 10200 Kg/H

2 models of rolling mills taken by force

Road-approved. With dice flows from 3900 to 10200 KG/H. The TOY Group’s power-taking rolling mills are equipped with transcobloc cylinders of (X L in mm) 500X450, 500X450, 800X1050. The hydraulic pressure between cylinders is 4.1 of 15.2 tons and offers an optimal and regular working quality. Tractor power 70 and 130 hp.

Road-approved, 2 models of Rolling Mills taken by force at DEBITS from 3900 to 10200 KG/H. THESE LAMINOIRS have TRANSCOBLOC TYPE CYLINDRES – 500mm or 800mm and lengths from 450mm to 1050mm.

TOY GROUP FORCE-TAKING ROLLING MILLS: THE TECHNIQUE

Characteristics of the force-taken models:

  • Road chassis consisting of a chassis with 1 axle, 2 suspended wheels with brakes and arrow.
  • Eye 50mm diameter.
  • Road approval.
  • Unloading by rigid flake screw or truck-type screw.
  • Loading by bucket or big bag.

Training by two groups:

  • Independent geared motor cylinders drive.
  • Industrial-series gearboxes.
  • High torque geared motor, easy load restart.
  • Technology without belts or chains, easy maintenance

High hydraulic pressure 3 to 15 tons:

  • Tightening principle: 2 hydraulic jacks push the mobile cylinder on the fixed cylinder (from 3 to 15 tons of pressure).
  • Cylinders supplying : hand pump tightening (control gauge)
  • Precise adjustment of the cylinder spread.
  • Fixed pressure for a regular work quality.


Safe rolling:

  • Hydraulic circuit with nitrogen sphere (cylinders kickback if abnormal pressure)
  • Racing cylinders setting with double-stop anti-crash cylinders.
  • Rolling mills equipped with sieve and magnet ramps.
  • Scrapers installed to ensure cylinders cleanliness.

TOY GROUP ROLLING MILLS: THE QUALITY

Innovative large-diameter cylinders:

  • Steel of heavy treated thickness. Intermediate flasks and reinforcement flaccids guaranteeing solidity. A whole high precision balancing.
  • diameter 500 to 800 mm provide the ideal angle of introduction(Nippel angle) for the passage of large seeds (peas or corn).

Transcobloc-type technology:

  • Preservation of tree strength and bending characteristics by seamless assembly (Transcobloc-type technology).

Accurate and constant flow:

  • Inverted screw feeder for regular and constant feeding of cylinders. Geared motor with a dimmer for precise adjustment of production flow.

Options

  • Motorized hatch
  • Cylinders treated with carbonitriding gas (longer life).

LAMINERS TAKING STRENGTH: CHARACTERISTICS OF THE 2 MODELS

Strength: Patterns and features

Models

500X400

800X1000

Cy cylinders: X L

500X450

800X1050

Average flows (Kg/h)

3900 to 4600

9000 to 10200

HP tractor power)

70

130

Pressure between cylinders (Kg)

4100

15200

Indicative flows, depending on grains and humidity levels. For optimal quality: humidity tx recommended from 14 to 16% .

Rolling mills: Special models

Special rolling mills

Depending on the activity, depending on the specifics of production and the implementation of the machines. TOY Group designs and produces your special rolling mills.

Design and production of special ROLLING mills TOY Group according to your production specifics and the implementation of the machines.

TOY GROUP ROLLING MILLS: SPECIAL MODELS

Some typical special models:

  • On a blender
  • On chassis/rail
  • Bucket loading hopper
  • Loading / Endless screw output

SPECIAL MODEL ROLLING MILLS: FEATURES

Same general and technical characteristics. Or according to specific models

  • Drive cylinders by independent industrial geared motors.
  • High torque geared motor, easy load restart.
  • Technology without belts or chains, easy maintenance.
  • High hydraulic pressure 3 to 15 tons:
    The Principle of tightening: 2 hydraulic jacks push the mobile cylinder on the fixed cylinder (3 to 15 tons of pressure).
  • Cylinders supplying : hand pump tightening (control gauge)
  • Precise adjustment of the cylinder spread. Fixed pressure for a regular work quality.
  • Nitrogen sphere (recoil of cylinders if abnormal pressure)
  • Equipped with sieve and magnet ramps. Scrapers installed to ensure cylinders cleanliness.
  • Innovative large diameter cylinders
  • Treated steel. Intermediate flasks and reinforcement flasks. A whole high precision balancing.
  • diameter 500 to 800 mm allow you to get an ideal angle of introduction.
  • Transcobloc-type technology
  • Inverted screw feeder. Geared motor with a dimmer for precise adjustment of production flow.

Options

  • Motorized hatch
  • Cylinders treated with carbonitriding gas (longer life).

Some TOY Group ROLLING mills of all types

Contactez nous par formulaire

J’autorise la société Groupe TOY (SAS RENÉ TOY) à me contacter à ma demande pour me présenter ses produits.

TOY Group Contact Information

General reception desk

Tel: ’33 (0)2 54 85 01 10
Fax: ’33 (0)2 54 72 60 67
info@toy-sa.com

TOY Group Sites:

TOY Group Montoire sur le Loir
Route des Reclusages 41800 Montoire sur le Loir

TOY Group Saint Amand Longpré
16 rue de l’Industrie 41310 Saint Amand Longpré

TOY Group Brittany
3 PA des Landes de Penthièvre 22640 PLESTAN